Alsecco Insulation Systems- How to prevent heat loss, reduce carbon emissions and play a part in slowing down global warming!
 Multiguard Property Solutions' hope you find the following information relating to wall thermal insulation systems in house or commercial properties useful!
Email: enquiries@multiguard-solutions.com
Telephone
Northants 01908-516366
Fax Northants 01908 511605
Alsecco
Ecomin
The alsecco Ecomin External Wall Insulation System provides an ideal combination of thermal insulation and fire protection. It was one of the first mineral systems on the market. Since then it has proved extremely successful for nearly three decades of practical application. Wide experience with the system guarantees a high level of quality and functional reliability. Ecomin offers a high level of water vapour permeability, it helps to save energy and to maintain the fabric of the building in the long term. The system also keeps the full range of design possibilities open.
Ecomin 200 is the primary system in this range. It
is available as a thin or thick coat render system with high levels of flexibility, able to cope where inconsistencies or irregularities in the substrate occur.
| Ecomin 200 |
 |
Vapour permeability |
|
Water repellant |
|
Provides an excellent range of textures, colours and finishes |
|
Excellent weathering and durability |
|
Increased fire resistance |
|
Consistency of finish |
Ecomin 300
Ecomin 300 is also a thick coat render system with similar properties to one of the Ecomin 200 systems. However, its higher level of reinforcement offers a greater degree of impact resistance
| Thick Coat Renders |
|
Vapour permeability |
|
Water repellant |
|
Provides an excellent range of textures, colours and finishes |
|
Excellent weathering and durability |
|
Increased fire resistance |
|
Consistency of finish |
|
High impact resistance |
Ecomin 400
Ecomin 400 is similar to the above but is faced with brick slips or architectural ceramic tiles.
| Facing Brick Slips/Ceramic Tiles High Impact |
|
Water repellant |
|
Provides an excellent range of textures, colours and finishes |
|
Excellent weathering and durability |
|
Increased fire resistance |
|
High impact resistance |
Ecomin 500
Ecomin 500 has a spar dash finish which offers high impact and vandal resistant properties
| Spardash High Impact |
|
Vapour permeability |
|
Water repellant |
|
Provides an excellent range of textures, colours and finishes |
|
Excellent weathering and durability |
|
Increased fire resistance |
|
High impact resistance |
|
Let us help you transform your residential or investment property -
externally as well as internally
Multiguard Solutions are approved
Alsecco Contractor
View Details and
Process
View Alsecco Project
- Insulation of an Aircraft Museum
Alsecco Extermal Wall Insulation
Basic
The Basic External Wall Insulation System is a real success. Both economical and versatile, it has proved successful for many decades and for millions of square metres on buildings, in a wide variety of uses. The system helps to save energy, to preserve the environment, and it provides long-term protection for the building. At the same time the level of comfort inside the building is increased and a pleasant indoor climate created. Finally, Basic with its wide range of associated finishes such as render, ceramics or wood, provides the architect, planner or owner with almost unlimited scope for realising creative ideas.
Basic 1 is the primary system in this range. It is a high performance, fully acrylic or mineral/silicone based thin coat render system.
| Basic 1 |
|
Cost effective |
|
Water repellant |
|
Provides an excellent range
of textures, colours and finishes |
|
Excellent weathering and durability |
|
Excellent for detailing |
Basic 2
Basic 2 is a thick coat render system ideally used where inconsistencies or irregularities in the substrate occur. The thick coat render system therefore provides a greater consistency of finish
| Thick Coat Renders |
|
Cost effective |
|
Water repellant |
|
Provides an excellent range of textures,
colours and finishes |
|
Excellent weathering and durability |
|
Excellent for detailing |
|
Consistency of finish |
Basic 3
Basic 3 is also a thick coat render system with similar properties to Basic 2. However, its higher level of reinforcement offers a greater degree of impact resistance
| Thick Coat High Impact Renders |
|
Water repellant |
|
Provides an excellent range of textures, colours and finishes |
|
Excellent weathering and durability |
|
Excellent for detailing |
|
Consistency of finish |
|
High impact resistance |
Basic 4
Basic 4 is similar to the above but is faced with brick slips or architectural ceramic tiles.
| Facing Brick Slips/Ceramic Tiles High Impact |
|
Water repellant |
|
Excellent weathering and durability |
|
Excellent for design |
|
Consistency of finish |
|
High impact resistance (brick slips) |
Basic 5
Basic 5 has a spar dash finish which offers high impact and vandal resistant properties.
| Spardash High Impact |
|
Cost effective |
|
Water repellant |
|
Consistency of finish |
|
High impact and resistance to vandalism |
|
|
 |
|
Office address, telephone, fax, email and Comments Form.
Contact
Multiguard Property Solutions UK!
|
|
|
|
|
|
|
|
 |
|
Request a free colour brochure specifically related to your
property problems or
renovation ideas
|
|
|
|
|
|
|
Wallcoatings hide surface imperfection in your property walls. Textured exterior wall coatings transform the appearance of your home and increase value. Will not crack, chip, fade or peel- choose from a range of colours and styles
|
|
|
|
|
|
