At Multiguard we only carry out correct re-pointing on stone and older, softer brickwork that incorporates the following:

1. We do not use a cement based mortar as this will crack and hold water in the stone and brick. This leads to a damper wall and eventual spalling or blowing of the stone and brick fronts as all moisture is forced out through the faces and none via the pointing.

2. We always use a good quality lime mortar that is softer than the wall material and allows the walls to dry out by releasing trapped moisture.

3. We rake out the old failed mortar to a depth of at least the width of the pointing to a minimum 15mm

4. We never use “ribbon pointing” whereby the pointing stands proud of the stone/brick face as this holds water and looks ugly as well.

5. We always point to a maximum of flush with the wall face or even better slightly recessed.

6. We take care when raking to ensure no damage to the stone or brick edges occurs.

To offer on-going protection and reduced maintenance we then offer a clearcoating service , complete with a 10 year Guarantee.

To find out how our service can help your property CALL US NOW on 01908 516366 or if you prefer, use the “Contact Us” button.