The aircraft museum was a 1.98 uvalue thermal heat loss.
After fitting our insulation system the uvalue is reduced to 0.48

Previously they were using four dehumidifiers which filled up the water tanks once every week. Now they only have one - and that one still hasnt filled the water tank three months after project completion!

---

'Before' pics of the Airfield Museum control tower which is a solid wall construction.

We undertook a complete renovation of external wall insulation - using an anti crack resistant polymer, fibres and acrylic render system.

The Aircraft Museum is in Parham Woodbridge in Suffolk.  

Parham keep old aircraft sections and  parts from aircraft from the second world war.
The parts were getting corroded and rusty and it was cold inside the property due
to being a solid wall construction..  

We fitted external wall insulation and reduced the u value which is thermal heat loss
from 1.98 down to 0.50 which makes the thermal heat loss reduced down to equal a new
cavity wall insulation  
Therefore we reduced the heat loss by at least 40%- and carbon omissions by 45%.  

Staff at Parham used 4 dehumidifiers to control the damp moisture in the air, which were emptied of water twice a week. Now our system has been fitted they only use
one dehumidifier which has not been emptied yet after eight weeks.

They are extremely pleased we have preserved their irreplaceable
aircraft parts in the museum.  


After Photo! - Multiguard Solutions External Wall Insulation System

Additional Useful Information About External Wall Insulation Systems

All solid wall construction houses and properties have a high uvalue of at least 1.98.

This means they suffer very badly with heat loss. Also from a high degree of carbon omission.

  The government have a commitment to reduce carbon omission by 50% by 2010.  

External Wall Insulation is a very important contribution to reaching their goal.  

External wall insulation also helps - due to the high increase in fuel bills.


External Wall Insulations will drastically reduce fuel bills - reducing costs by at least 35%.  

Multiguard Solutions are  fully approved contractors of
ALSECCO
WEATHERBY BUILDING SYSTEMS  

Weatherby are the main suppliers in Europe for high quality external wall insulation systems.

  Multiguard Solutions have our own system which is the
  MULTIGUARD-SOLUTIONS SYSTEM.

Ask us for a no obligation quote!